GNS3 and VPCs

http://gns3cisco.blogspot.com/2011/04/virtual-pc-simulator.html
in pervious post we explain a little bit about VPCs now open VPCs and give pcs IP address
run show command to view pcs ip address and gateway and Lport and Rport

Drag a Cloud
configure the cloud

every cloud represent one VPCs ( PC )

1. go into NIO UPD tab
2. configure Local port and Remote port with Lport and Rport on VPCs
3. click add then OK
now if you want change the symbol of the cloud to lock like PC


now our PCS is ready you can now connect it with an switch and ping it or traceroute

Sincerely
Abdulrahman Obaid